Cart 0
Victron Energy Orion-Tr Smart 12/12-18A Isolated DC-DC Charger w/ Built-in Bluetooth

Victron Energy Orion-Tr Smart 12/12-18A Isolated DC-DC Charger w/ Built-in Bluetooth

Victron Energy

Only 2 left!
  • Victron Energy Orion-Tr Smart 12/12-18A Isolated DC-DC Charger w/ Bluetooth
  • Model: ORI121222120V
  • Professional DC to DC Adaptive 3-stage Charger With Built-in Bluetooth
  • For use in dual battery systems in vehicles or on boats where the (smart) alternator and the start battery are used to charge the service battery
  • The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch and has an engine running detection mechanism
  • The Orion Tr-Smart charger can be used in 12V or 24V systems and is suitable for both lead acid and lithium batteries.
  • Suitable for high temperatures up to 55°C with a full rated output up to 40°C
  • Bluetooth Smart enabled
  • IP43 protection When installed with the screw terminals oriented downwards
  • Fully programmable
    • Battery charge algorithm (configurable) or fixed output
    • Smart alternator compatibility: engine running detection mechanism
  • Adaptive 3-stage charge algorithm: bulk – absorption – float
    • For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery is completely recharged
    • For lithium batteries absorption time is fixed, default 2 hours
    • Alternatively, a fixed output voltage can be chosen
  • Specifications:
    • Input voltage range: 8-17V
    • Under voltage shut down: 7V
    • Under voltage restart: 7.5V
    • Nominal output voltage: 12.2V
    • Output voltage adjust range: 10-15V
    • Output voltage tolerance: +/- 0.2 V
    • Output noise: 2 mV rms
    • Cont. output current at nominal output voltage and 40 °C: 18A
    • Maximum output current (10s) at nominal output voltage: 25A
    • Short circuit output current: 40A
    • Cont. output power at 25 °C: 280W
    • Cont. output power at 40 °C: 220W
    • Efficiency: 87%
    • No load input current: < 80 mA
    • Standby current: Less than 1mA
    • Galvanic isolation: 200 VDC between input, output and case
    • Operating temperature range: -20 to +55 °C (derate 3 % per °C above 40 °C)
    • Humidity: Max. 95 % non-condensing
    • DC connection: Screw terminals
    • Maximum cable cross-section: 6AWG (16 mm²)
    • Weight 3 lb (1.3kg)
    • Dimensions )HxWxD): 5.1 x 7.3 x 2.8 inch (130 x 186 x 70 mm)
    • Protection category: IP43 (electronic components), IP22 (connection area)
  • Standards:
    • Safety: EN 60950
    • Emission / Immunity: EN 61000-6-3, EN 55014-1 / EN 61000-6-2, EN 61000-6-1, EN 55014-2
    • Automotive Directive: ECE R10-5